Balrog - Digital sculpture work in progress

balrog_084_posed

Hi all,

This is another update for The Balrog. I have now roughed in the pose for my final illustration. Next I will be refining the pose so it feels more natural and following that I will adjust muscles according to the pose and start small surface detailing.

Software: Maya 2009, Zbrush 3.1

Time so far: 3 hours base mesh and proportions, 20 hours sculpting, 5 hours rebuilding topology. Those arm spikes were a pain!

Best regards,

Chad Fox
Visual Effects Artist | Modeler | Lighting TD | Instructor

Protodemon - Rapid prototyping and conceptualization

protodemon-header

There is no doubt about it, Protodemon’s competition will have their hands full trying to match the level of detail Protodemon delivers. I have had the opportunity to hold ten different digital sculptures output by Protodemon ranging from less than inch small to just over a foot tall and can’t wait to have one of my own made.

Their Rapid prototyping machine, dubbed “The Water Cooler” because of its transparent plastic casing covering the machine, has far fewer limitations as to what it can output compared to the most frequently used machines in the industry. As you can see with the resin outputs for Heber Alvarado’s “Chaos Armin” and Chris Bostjanick’s “Tentacle Girl” you are not limited to large well fastened accessories and details. Their basic output prints details as small as 100 microns (0.1 cm) and when needed or requested, they can print details as small as 50 - 25 microns (0.05 cm -0.025 cm)!

Along with an astounding level of detail, Protodemon’s resin models are very lightweight and though not indestructible, they are not super fragile. The polymer used is similar to hard plastic and can take a punch.

As a friend of Joe Bullock and Michael Amasio, the founders of Protodemon, I should wish them luck with their new business, but I don’t think they need it. Protodemon is going to take the rapid prototype industry by storm and has already set the bar several notches higher.

Regards,

Chad Fox
Visual Effects Artist | Modeler | Lighting TD | Instructor

Al.chemy quick sketch software

A friend, Jon Riva, showed this simple yet incredibly useful software to me just this weekend. It is worth checking out if you in any way design or otherwise create creatures, buildings, matte paintings, vehicles, etc.. It is just as useful if you simply like drawing or making abstract art!

Alchemy is a free, open source program that allows the user to draw basic silhouette shapes with lightning speed. You can then use a variety of shape and painting modifiers that can transform your sketch into.. who knows what. The gold in Alchemy is the speed at which you can start to generate ideas from what can sometime be called homemade Rorschach ink splotches.

You have to sign up for the mailing list to receive the link to download and there is no catch to signing up your email.

For best results, I suggest changing the “Style” (Left most button) to solid fill.

In the posted image here, the artist sketched various ideas in alchemy (Left hand side) and Painted over the sketches (Right hand side) with another software e.g. Photoshop or Painter.

www.al.chemy.org/
Interface Manual for Alchemy

Chad Fox
Visual Effects Artist | Modeler | Lighting TD | Instructor

Fixed RRS feed.

redrssMy RSS feed link was technically working, but when you click on the RSS button it was not very straight forward how you use it to subscribe. So I have fixed it up with a handy “FeedBurner” link.

Cheers

.

Chad Fox
Visual Effects Artist | Modeler | Lighting TD | Instructor

New page on LLTP

I have added a new “Services” page on Long Live the Pixel to clarify which services I offer remotely.

Cheers,

Chad Fox
Visual Effects Artist | Modeler | Lighting TD | Instructor

Starting a Business from home part 2 [Income Tax]

taxes It’s that time of year, the birds are singing, the rain is pouring and the tax man is collecting.  Since I have only just recently registered my business I have no taxes to claim except for my 2008 personal income. However, I took the opportunity now to research and ask my accountant what I should know for next year.

As mentioned before “Keep Everything!”. Any receipt, invoice or paperwork related at all to your business. I also recommend you brush up on your organizational and bookkeeping skills to keep a track record of your finances and to keep your paperwork in order — This will also save time for your accountant when reviewing the years paperwork and ultimately save you money from the time saved.

Here is a quick checklist of expenses that you should keep paperwork for, whether in the form of receipts, invoice, investment gains, etc.

Examples of business expenses:

  • Accounting, legal, and consulting expenses
  • Advertising
  • Automobile expenses (used for business)
  • Bad debts
  • Business-related memberships and subscriptions
  • Business taxes, fees and dues
  • Continuing Education to improve business skills
  • Convention expenses (up to 2 per year) - Siggraph, Spark, etc
  • Delivery and freight
  • Depreciation of capital assets
  • Equipment rental
  • Insurance
  • Interest and bank charges
  • Maintenance and repairs
  • Management and administration fees
  • Meals and entertainment expenses (50% deductible)
  • Office expenses
  • Property taxes or rent on business property
  • Purchases of materials and supplies
  • Salaries paid
  • Subcontractors’ costs
  • Traveling expenses
  • Utility expenses
  • Workspace in the home (proportionate - includes rent, mortgage interest, property taxes, insurance, utilities, and maintenance)

Remember, keep everything you can. Your accountant will separate the wheat from he chaff and let you know what you can and can’t deduct in the end.

Next, I found these useful tax checklists for your personal and business income tax. Read them through now to see if there is anything you should look into further or if there are any actions to take now for next years taxes. For example,

Personal Tax Checklist 1.htm - Simplified but informative.

Personal Tax Checklist 2.pdf - Detailed and up to date for 2008.

Personal Tax Checklist 3.pdf - Even MORE detailed, I am personally using this one and cross referencing the others to make sure I have all bases covered.

Let me know if you have any questions. or other information that I could post about.

Regards,

Chad Fox
Visual Effects Artist | Modeler | Lighting TD | Instructor

Starting a Business from home (In Canada)

home_officeI recently started working as a Freelance contractor, dealing out my services as needed. I have been interested in Freelancing for some time and even more interested in learning the business side behind all of the actual work I will be doing. Just over a month ago I set out to learn the steps, pros and cons and possibilities of starting a business. Now I would like to share what I have learned in hopes that it will one day help you embark on the same task Owning a business license has many perks if you are in the right situation to use it.

1. What type of Business type do you want or need.

You can register your business in one of three ways: sole proprietorship, partnership or corporation.

  • Sole proprietorship means that you are the sole owner and directly responsible/liable for your entire business.
    • Cheap and easy to setup.
    • You can write off many of your purchases, bills and even a % of your rent. –More details to follow in this post–.
    • You don’t pay taxes upfront, so you need to save for taxes as you go, The plus side is that you can invest those savings until tax time comes around and turn a profit of a few Hundred or more.
    • You don’t pay EI, so if you are out of work, you can’t get EI.
    • You pay both the employer and employee CPP premiums.
  • Partnership is a split proprietorship. Each partner is equally responsible for the business.
    • Again, cheap and easy to setup.
  • Incorporation registers your business as a separate entity all together and opens a whole new realm of possibilities.
    • Costs more to set up and maintain, mainly accountant and lawyer fees.
    • Allows for significant tax deductions. Example, all income to the corporate account is only taxed 15% as opposed to the %30+ for personal income.
    • You can pay yourself with dividends (this is a limited % of the total income) from the corporate account with little additional taxation.
    • You are protected by the corporation, if sued, you cannot be sued directly.
    • You pay EI and CPP on any Salary paid out. You might need to pay yourself some salary if the Dividends do not cover your needs.
    • You can be double taxed, first the corporate tax, followed by a personal income tax when you pay yourself a salary.

I have chosen sole proprietorship until such time where my business income is consistent enough to justify spending money and time on incorporating.

2. Name yourself!

Now you need to choose a business name. How do you want to brand yourself? You can be as creative as you want, but there are only 2 rules.

The first part of the name must start with a distinctive, non-descriptive word or phrase. Your name, a location or fictitious name or phrase are all allowed. ie Rick Smith, One Up, Ooga Booga or Long Live The Pixel.

The second part of your name must be a descriptive word. For example, Marketplace, Digital Art, Entertainment or Creative services.

So the business name Long Live the Pixel Creative Services would be legitimate, but Creative services by Long Live the Pixel would not be.

One great tip that my good friend Peter Hunt shared with me is that if you can, try to make your descriptive word as vague as possible so the government can’t limit you to your services rendered. If you make your business name Ooga Booga Digital art, then you can actually get into some legal trouble — Though very unlikely — if they find you have been providing non digital art services too. This is a little more serious if you are say, registered as an accountant and you start providing art services.

Here are some vague name suggestions: Entertainment, Creative services, Art services or Arts. Prime example. Electronic Arts!

  • Request your name approval in BC online at bcregistryservices Note that you can request up to Three names at a time, if your first requested name is approved, they won’t check your second and third. This will cost you about $35.

3. Register your business with all 3 levels of government.

Provincial - When you receive approval you have 56 days to register your name with BC. Step 3 from this page at bcbusinessregistry will take you pretty the rest of the way. To register your approved name it will cost you $40.

National - When you are done, the website will ask if you want to transfer to the Canada CRA –Revenue Agency– Website to register your business in Canada and obtain a GST number. Do this next and note that you only need to register for GST if you are going to make more than 30,000 income with the business in it’s first year. After that, you will need to register for GST.

Municipal - This step is fairly easy. Browse to your city of residence’s website and see if you can register online. I registered my business with North Vancouver. This can cost you anywhere from $50 to $150 or more. I paid $110.

Information.

GST.

  • You must charge 5% GST on all invoices and pay the collected GST to the CRA.
  • You choose how often you want to submit your GST to the CRA. Quarterly or Yearly.
  • Keep track of your numbers, there are penalties for missing or undercutting GST owed to the CRA.
  • The plus side to having a GST number is that you can get back some or all of the GST paid on any purchases or bill payments related to your business.

Taxes and write offs.

What is a tax write off? Basically, if you make $1000 you will be taxed a %, basic info, I know. So say you are charge 30% tax on your $1000, you pay the Government $300. Now if you purchase some equipment for $1000 and write off the purchase, you will get the $300 back because the $1000 you spent is business related and is no longer taxable income.

  • Get an accountant and save every receipt from everything you buy.
  • If you are running a home office, you can write off a % of your rent/mortgage equal to the amount of space your office and equipment takes up. My desk, materials and equipment take up about 25 to 30% of my apartment. So I will write off 27% or so of my rent.
  • Write off 100% of your Cable, internet or phone.
  • Write off some of your food.
  • Write off your Toilet paper.
  • Bought a new TV? Write it off, chances are you will be using DVD’s as reference and testing your Portfolio DVD’s, so it counts!
  • AND get your GST back from all or a % of these purchases.

Links.

http://www.taxtips.ca/small_business_income_tax.htm
http://www.taxtips.ca/gst.htm
http://www.canadaone.com/tools/startingabusiness.html

Good luck!

Chad Fox
Visual Effects Artist | Modeler | Lighting TD | Instructor

Universal 2d track data converter. Very useful.

http://origami.myvnc.com/trackconvert/

This link may only be useful to a select few who use 2d tracking in compositing. But of those few, they will find it an invaluable tool.

Cheers for now.

Chad

Taking your portfolio the extra mile.

Leave your thumb print on everything

Leave your mark on everything!

How can you make your portfolio stand out from the next guy in line? It’s simple; Make sure your work is better than his!

Ok. So that’s not the purpose of this post even though it is kinda true. Instead Imagine your work is on par with a fellow artist, how then can your portfolio grab the attention of those reviewing it?

Upgrade your Presentation

1. Make it Clean and Clear. Refrain from sending your portfolio out until it is refined and functional. You want your portfolio to show your work and not distract the viewer with broken links, disorganization or poor video/image quality. Clean it up and make it work!

2. Branding and Common design. Integrate your logo, business card, and folder into one well-designed theme. Your contact information should be on everything.

3. Add multimedia. Today, the best portfolios combine a multimedia presentation with hard copies. Build a simple and functional website, print business cards, build a working DVD with menu and Print some of your best stills on good quality photo paper to display in your interviews. And of course include your resume as well. PS. Make sure you brand EVERYTHING with the same logo, color, Imagery and font.

4. Show your best work ONLY.

Organize and label your images

5. Group similar artwork together. Character, Vehicles, Paintings, etc.. Group as you see fit.

6. Include all the important information. What software did you use? Do you have good render times? Did you do all or only part of the work? Make sure you include this information so viewers won’t have questions and assumptions.

In person, give the right attitude.

7. Be positive. Never put yourself down or apologize for your art. This is more of a problem for Artists coming out of school. Understand that if you were called into the interview, it means they thing you’ve done SOMETHING right, don’t forget that. Show instead that you love your art. Share your passion and they will notice.
8. Don’t be a prima donna.You’re never too good, or too famous, of an artist to be nice to others. Sugar can get you everywhere!

Brush up on your salesmanship

Learning HOW to sell is part of being a professional artist. Practice often.

9. Sell yourself first. Most companies have head hunters, but why leave your career options up to chance. Step up and put yourself out there. Start getting involved in the industry community, network, and put your best foot forward. If someone likes you, it could lead to a big break.

10. Persevere through rejection. It is important that that you continue trying, even after the tenth phone call or tenth door slammed on you. Keep going and keep smiling!

-Chad

Just say “No to all” [Windows Trick]

When You are copying a series of files to a directory that has some, but not all, of the same files you get the windows prompt saying “This folder already contains a file named ‘FileName.jpg’. Have you ever wondered why you can say “Yes to all”, but not “No to all”?

This has long been a pet-peeve of mine when updating files on a portable drive or consolidating my reference images together to eliminate duplicates.

However, I recently discovered a solution to this time waster. Hold SHIFT and press “No” to say “No to all”!

I hope that helps some of you. :)

I would also like ask if you have any Windows OS pet peeve solutions? There are many tips and tricks out there. So lets here them!

Cheers